[V8] various TB questions
Jeff Goldberg
gold123 at ntelos.net
Fri Oct 7 08:03:56 EDT 2005
I used right angle snap ring pliers.
Jeff
-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com]On Behalf
Of Dave Head
Sent: Friday, October 07, 2005 7:53 AM
To: Kneale Brownson
Cc: v8 at audifans.com; John Dodd
Subject: Re: [V8] various TB questions
Once it's loose, it doesn't take any great leverage to adjust...
Kneale Brownson wrote:
>1. I used a torx head socket on the end of a 6-inch extension for my 1/4"
>drive wrench to BREAK off the head of that screw. It's a straight shot for
>that sort of set-up.
>
>2. You could use a nail or a punch for 3204.
>
>3. Dave Head says he uses needlenose pliers in place of the 4493. Don't
>know how he gets enough leverage.
>
>
>
>
>
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question? Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!
More information about the V8
mailing list