[V8] Simple TB Change

[Kneale Brownson]

I believe this is why the manual calls for loosening the cam pulley bolts
so the pulleys can turn freely while the belt is tensioned.

At 08:07 AM 10/7/2005 -0400, Jeff Goldberg wrote:
>If the cam pulleys are tight how do you properly tension the section of belt
>between the cams?  It would seem possible that manufacturing differences
>from one belt to the next could allow the cams to roll slightly when the
>engine is first run if the pulleys are not allowed to rotate independent of
>the cams when the belt is tensioned.  This may be why listers are finding
>cams slightly out of sync when trying to install cam locking plates.
>
>Jeff
>
>
>> I don't understand why everyone spends so much time with the
>> cam locks and,
>> worse yet, taking off the cam sprockets.
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!