[V8] TB,motor mounts,serpentine belt

[Dave Head]

The front mount is broken as a result of your main motor mounts sagging. 
This is not at all unusual. To repair you really should replace all 
three. This is really more of a torque mount. It unbolts quite easily 
and has to be removed anyway.
The serpentine belt looks like it may be offset 1 rib. Don't put it back 
on that way...

John Dodd wrote:

>Hi
>I managed to remove the front of the car with some help.Now it's lying
>above the other stuff I pulled out
>Ended up removing the tranny cooler lines  and cut the  ties to the
>cable  leading to the smaller fan.
>I used some wire to suspend all this stuff.
> 
>Things I found:
>1.	The serpentine belt is riding on the viscous fan offset as shown
>in the photo.
>2.	Also the motor mount on the passenger side looks broken.
> 
>Any advice on how to tackle these two ? (or the cause of it)
> 
>Tomorrow I'l try and work on TB.
> 
> Here are some pictures: http://www.freewebs.com/myv8q/
>John
> 
> 
> 
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
>
>  
>