[V8] Timing Belt Saga

[Kneale Brownson]

Guess I might as well start a new timing belt problems thread since the
bumper cover finally came off.  I have the core support and all its
ancillary parts disconnected but I can't "pull the front off the car and
lay it under" as described in the KB.  The stuff on either side of the
radiator runs into the inside flange (the one for the one stud/nut that was
my hangup on the bumper cover removal) on the end of the frame rails.
There's what looks to be a notch in that stuff to accomodate the flange,
but the fender attachment arms of the core support run into the fender
before I can hoist the assembly high enough to clear the flanges.  What a
PITA this process is.