[V8] Front control arm Q

[S_Matus]

Ingo -
 
I purchased the TRW units for my V8. the pair was $75 on e-bay.  They definately are not as robust as the stock units.  There was an odd look to one control arm (I do not remember which side was which).  One unit looked as if the casting was made incorrect and it had a 90 degree twist to the cast piece near the sub-frame mount end.  Also, one of the arms was slightly thinner in its casting.  
 
I have not installed them yet, so I can still rethink the TRWs.
 
Scott.
 
---------  Original  ---------

Message: 3
Date: Mon, 12 Sep 2005 09:57:09 -0400
From: "Ingo Rautenberg" <i.rautenberg at waratap.com>
Subject: [V8] Front control arm Q
To: <v8 at audifans.com>
Message-ID: <001d01c5b7a1$fc821b90$52bab1d0 at ingo>
Content-Type: text/plain;	charset="iso-8859-1"

It's time to renew the front control arms (inner bushings torn and one 
outer
balljoint boot ripped :-(

So what's the consensus (if there is one) between the OEM Lemforder and
aftermarket TRW?  Lemforder would run me 2x the TRW -- but if they last 
2x
as long, that's worth it to me.  I don't like doing a job more often 
than
needed.

Ingo



		
---------------------------------
Yahoo! for Good
 Click here to donate to the Hurricane Katrina relief effort.