[V8] wheel baring's

[dsaad@icehouse.net]

There is a tool which allows you to do the job with the strut on the car - but
you still have to remove the sway bar, lower control arm, tie rod, and axle. At
this point, you are I think 4 nuts away from just removing the whole strut - at
which point you can just bring it to a machine shop and have it done right. You
would also be able to replace the shock accordian boot if needed, and even the
shock without any special tools. I believe in either case you still need to do
an alignment.

Dave

Quoting Sscothorne at aol.com:

> hi all
> im setting of for spain in the morning and really think i need to change
> the
> front wheel baring's
> having never done this job before i need to know how to and what tools i
> will need.
> any help would be appreciated
>
> simian
> 90 v8q uk
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>