[V8] Bleeding the brakes

[radek@istar.ca]

I made one a couple of years ago and it works fine, except that I only put 10-15 psi of
pressure, above 
that the brake fluid reservoir looks like it's going to explode.

Incidentally, I never put any brake fluid into to bleeder itself, just top up the
reservoir, install the 
bleeder cap and put some pressure.  Works fine.

Radek
91 V8Q 5-sp.

> ------------------------------
> 
> Message: 9
> Date: Wed, 28 Sep 2005 10:51:58 -0500
> From: "Korn, Bob" <Bob.Korn at Fike.com>
> Subject: Re: [V8] Bleeding the brakes
> To: "Jeremy Ward" <jward.v8 at gmail.com>, <V8 at audifans.com>
> Message-ID:
> 	<0BC1E985C502E141AB14A50652D3B5B7B714C7 at blsusaexch.fike.corp>
> Content-Type: text/plain;	charset="us-ascii"
> 
> Someone made a simple brake bleeder out of a small  garden type pump
> sprayer, (about $10),  a cheap pressure gauge($10), and a length of hose
> attached to a universal brake master cyl cap with a  brass hose fitting
> placed in the middle.  Pour in some brake fluid, pump up to 20-30 psig,
> and bleed away.   I going to install some stainless lines soon and was
> going to make one.  Will post my results.
> 
> Bob
> 90V8Q  158K Pearl Gray Sport Seats 17"Avus