[V8] Gauge cluster fix

[Ingo Rautenberg]

I was just reading about people successfully using Brasso on their I- 
Pod Nano's -- thedy seem to be prone to scratching of the screen...   
No BTDT (yet)

Ingo


On Apr 18, 2006, at 3:44 PM, Coleman, David wrote:

> A hardware store should have some plexiglass polish/scratch remover.
> Not BTDT myself, but when the movers put a scratch on the front of our
> washing machine with plexiglas (actually probably lexan or some-such),
> everyone had the same opinion as to how to fix it.
>
> -dc-
>
>
>> As I noted before, on the new cluster I'm building I
>> scratched the inside of the bezel ... I'm going to go at it
>> with a Dremel tool and some rubbing compound ... but I was
>> hoping to hear with someone with BTDT on removing scratches
>> in plastic.  In my case it was just the tip of the Xacto that
>> gouged a fairly clean bit ... but it will be very visible if
>> I don't do something about it ...
>
> THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE  
> PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM  
> DISCLOSURE. If the reader of this message is not the intended  
> recipient, you are hereby notified that any dissemination,  
> distribution, copying or use of this message and any attachment is  
> strictly prohibited. If you have received this message in error,  
> please notify us immediately by replying to the message and  
> permanently delete it from your computer and destroy any printout  
> thereof.
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/ 
> listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ...  
> all contributions welcome!