[V8] Re: Momo steering wheel

[J123fs at aol.com]

I have a Momo wheel on my 91, that also was on my previous 90. 
I used a VW/Audi Momo adapter that I modified to accept a non airbag  contact 
ring from a junkyard 5000. It went into place onto the adapter with a  slight 
press fit and some epoxy. The ring had a inward facing wire grommet nub  that 
fit into a hole on the adapter, and located the ring. Very easy. 
Just don't loose the spring loaded contact on the column, I lost mine when  
it shot out into oblivion, and I made another one by grinding down a key way to 
 the same size.
Let me know if you need pics. I could pull the wheel if ness.
-Jack
 
 
In a message dated 1/3/2006 8:36:45 P.M. Eastern Standard Time,  
v8-request at audifans.com writes:

Message:  4
Date: Mon, 02 Jan 2006 18:20:44 -0500
From: "kyle leatherwood"  <kyle_leatherwood at hotmail.com>
Subject: [V8] Momo steering wheel  question.
To: v8 at audifans.com
Message-ID:  <BAY108-F15FA161FD837536BE44C76FB2D0 at phx.gbl>
Content-Type:  text/plain; format=flowed

Has anyone successfully installed a momo  steering wheel on a V8, without a 
load of modifications.
I bought a  Momo Fighter for my 1990 V8 and ran a temporary wire for the horn 
to work,  for the hub adapter they sent me was for a non airbag car.  Now 
that  I have my lovely new 91 V8 5 speed, I would like to put in this wheel  
using the stock horn brush (contact) in the steering column surround and  not 
have to buy a non airbag surround or have an ugly wire hanging from  
underneath the steering wheel.

Any suggestions would be  appreciated!!