[V8] ECM connector/panel removal

Kneale Brownson kneale at coslink.net
Thu Jan 12 20:58:10 EST 2006


You have to remove the dash endcap and take out a couple (maybe three)
screws exposed there to get the panel off.


At 04:53 PM 1/12/2006 -0700, John Dodd wrote:
>It's all regarding the issue I have with the poor running condition.
>I  decided to remove the panel under the steering wheel to find the J220
>ECM connector and check the grounds.
>I removed 3 screws but the left side of the panel(by the door) does not
>come off. It's stuck on the last 3 in just under the wood
>veneer.Anything that I missed ?
>Thanks
> 
> 
> 
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!



More information about the V8 mailing list