[V8] [V8 coolant Temp Sensor Values

[Michele_Deltergo at KeyBank.com]

Ingo,
My front cyl head sensor is white (If I recall from yesterday?)  and the
rad sensor is black. (for sure)  Do you have a PN for the rad sensor?  What
does the rear cyl head sensor drive?
thx
mike


Dave,

No, they're two different sending units.  According to ETKA, the rear
one (white housing) PN# 035 919 369 M Thermal switch -10/20/80 C  2
pin M14x1,5

The front one is 077 919 501 (black housing) temperature sender 120 C
also 2 pin M15x1,5

HTH

On a side note, I'm wondering if I'm developing too much fuel
pressure in the system, as I hear more and more the purging/whistle
sound of a valve by the rear of the car by the tank and I always have
a nice pressure of escaping air when removing the fuel cap.  Much
more so the with the '91.  This is in the '93.

Ingo



*******************************************************************************
This communication may contain privileged and/or confidential information. It
is intended solely for the use of the addressee. If you are not the intended
recipient, you are strictly prohibited from disclosing, copying, distributing
or using any of this information. If you received this communication in error,
please contact the sender immediately and destroy the material in its entirety,
whether electronic or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the 
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose
such information for any purpose other than to provide the services for which
you are receiving the information.

127 Public Square, Cleveland, OH 44114
*******************************************************************************


If you prefer not to receive future e-mail offers for products or services from
Key send an e-mail to DNERequests at key.com with 'No Promotional E-mails' in the
SUBJECT line.