[V8] location of rear Audi rings emblem?

Ingo Rautenberg irautenberg at comcast.net
Sun Mar 5 19:05:13 EST 2006


BTW, Jeremy

Since the car is so freshly painted, I would wait a month or two before
applying the rings -- until the paint has fully cured.

Ingo

----- Original Message ----- 
From: "Ingo Rautenberg" <irautenberg at comcast.net>
To: "Jeremy Ward" <jward.v8 at gmail.com>; <V8 at audifans.com>
Sent: Sunday, March 05, 2006 5:52 PM
Subject: Re: [V8] location of rear Audi rings emblem?


> Try 7/8" or ~22 mm as measured at the trunklids of 3 V8's ( a '90, a '91
and
> a '93 and one trunklid-only (not sure what year V8 that one's from   :-)
>
> That's measured at the bottom of the rings to the lower lip of the
trunklid.
>
> HTH
>
> Ingo
>
> ----- Original Message ----- 
> From: "Jeremy Ward" <jward.v8 at gmail.com>
> To: <V8 at audifans.com>
> Sent: Sunday, March 05, 2006 11:50 AM
> Subject: [V8] location of rear Audi rings emblem?
>
>
> > Car is almost ready fro prime-time; pictures soon to follow.
> >
> >
> >
> > Could someone tell me how far up from the trunk lip to the bottom of the
> > Rings on the trunk lid?  Is 5/8" correct?  I also seem to remember 2cm
> which
> > is a strong 3/4".
> >
> >
> >
> > Thanks in advance,
> >
> >
> >
> > - Jeremy
> >
> > _______________________________________________
> > Audifans V8 mailing list
> > Send posts to: mailto:V8 at audifans.com
> > Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> > Have an Audi V8 question?  Check the Audifans Knowledgebase!
> > http://www.audifans.com/twiki/bin/view/Audi/V8
> > Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!



More information about the V8 mailing list