[V8] V8 window switch error
Kent McLean
kentmclean at mindspring.com
Thu May 18 11:04:03 EDT 2006
Massár Attila Valter wrote:
> Thank you! I find the two links.
> My problem is more complicated. :) :(
>
> The left front window is ok, but the others are not working.
> And when I push any of the driver side switches,
> (of course except the left front) the lamps in the instrument
> table (arm holder) are off, and nothing happends.
> I suspect the error is in the big switch table in
> the arm holder, but I'm not sure.
> I tryed to resolve the circuit digram, but I can't understand,
> the logic of that. 4 pages only the power window... :)
> I can't follow the lines. :(
I still think the problem is broken wires inside the rubber
accordian boot between the driver's door and the body/jamb.
The switches switch ground, so that in one direction they
provide 12V power, and in the other they act as ground/earth.
Open up that rubber boot and look for a) broken wires, and
b) broken insulation with weakened wires. If the wires on
the driver's side are OK, make the same check on the
passenger side door.
> What do you think? If I write to a mailing list, do I have
> any chance to get solution?
Yes. Your chances are much better than relying on just me. :)
More heads to work on the problem, more ideas to fix it.
--
Kent McLean
'94 100 S Avant, "Moody"
'89 200 TQ, "Bad Puppy" up in smoke
More information about the V8
mailing list