[V8] Defeat the headlight warning...100/200/V8

[Ingo Rautenberg]

Nice to see the solutions get easier as time goes by : )

Ingo
----- Original Message ----- 
From: <RockinV8Q at aol.com>
To: <v8 at audifans.com>
Sent: Sunday, September 10, 2006 11:22 PM
Subject: [V8] Defeat the headlight warning...100/200/V8


> Remove the headlamp bulb monitor ( aka warning relay) and bend pin  "K" 90
> degrees so when you reinsert it into its socket pin K no longer makes any
> contact. This prevents the ground signal from being sent to the Cluster.
:)
>
>  100/200 has the monitor in the relay rack behind the drivers knee  pad,
V8
> has it located in the pass floorboard relay rack. It looks like a  big
double
> relay and each pin is clearly labeled on the bottom of the  monitor.
>
> KT
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!
>