[V8] Defeat the headlight warning...100/200/V8

[Kneale Brownson]

Actually,  Keith Tackett advocated the bent pin approach a long time ago.
Being anal, I went for the jumpers so I could "save" the relay.


At 10:57 AM 9/11/2006 -0400, Ingo Rautenberg wrote:
>Nice to see the solutions get easier as time goes by : )
>
>Ingo
>----- Original Message ----- 
>From: <RockinV8Q at aol.com>
>To: <v8 at audifans.com>
>Sent: Sunday, September 10, 2006 11:22 PM
>Subject: [V8] Defeat the headlight warning...100/200/V8
>
>
>> Remove the headlamp bulb monitor ( aka warning relay) and bend pin  "K" 90
>> degrees so when you reinsert it into its socket pin K no longer makes any
>> contact. This prevents the ground signal from being sent to the Cluster.
>:)
>>
>>  100/200 has the monitor in the relay rack behind the drivers knee  pad,
>V8
>> has it located in the pass floorboard relay rack. It looks like a  big
>double
>> relay and each pin is clearly labeled on the bottom of the  monitor.
>>
>> KT
>> _______________________________________________
>> Audifans V8 mailing list
>> Send posts to: mailto:V8 at audifans.com
>> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>> Have an Audi V8 question?  Check the Audifans Knowledgebase!
>> http://www.audifans.com/twiki/bin/view/Audi/V8
>> Have a V8 answer? ... Please help others by adding to the KB ... all
>contributions welcome!
>>
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!