[V8] Headlight relay - old thread...

[Michele_Deltergo at KeyBank.com]

John,
you've had a few responses, but short of those who like to go one relay per
bulb which will work for my 2 cents the easiest defeat if your smart enough
to now when your bulbs go out is to pluck the bulb check relay and bend
over the little tab Marked "K" and reinsert.  This defeat the check light.
No jumpers needed no crimping no fumbling. should take 3 minutes start to
finish.
Mike

From: "John Bysinger" <doog at bysinger.net>
Subject: Re: [V8] Headlight relay - old thread...

I'm about to go shopping for the supplies to wire up my euros, and did a
quick search on the list and found this thread.  Does anyone have the
information handy on what to do to avoid the headlight dash nag when using
relays?  I'm a big fan of wiring relays for headlight conversions, and
definately want to go this route.  (I'm also going to tie in the corner
light to the turn signal, but that's a whole different story :)




*******************************************************************************
This communication may contain privileged and/or confidential information. It
is intended solely for the use of the addressee. If you are not the intended
recipient, you are strictly prohibited from disclosing, copying, distributing
or using any of this information. If you received this communication in error,
please contact the sender immediately and destroy the material in its entirety,
whether electronic or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the 
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose
such information for any purpose other than to provide the services for which
you are receiving the information.

127 Public Square, Cleveland, OH 44114
*******************************************************************************


If you prefer not to receive future e-mail offers for products or services from
Key send an e-mail to DNERequests at key.com with 'No Promotional E-mails' in the
SUBJECT line.