[V8] wheel spacers

[QSHIPQ at aol.com]

I have run 255/40 on Borbet type C 17 x 8.5 ET 30 on both our 91 v8's  
without rubbing (it's really close), both stock ride height).  That should  give you 
some math to work with...  
 
HTH
 
Scott J
91 v8
In a message dated 4/1/2007 9:23:56 A.M. Central Standard Time,  
ingo.rautenberg at gmail.com writes:
Andrew,

Shouldn't be a  problem.  You will need studs and appropriate lug nuts.
For spacers,  only go H&R, as they have the hubcentric lip
machined-in.  I've even  used the 15's with success on ET 30 and 35mm
17x8 wheels.  Wicked  ;-)  Only rubbing was inner front fender wells on
tight  turns.

HTH

Ingo

On 4/1/07, Andrew Schlueter  <andyschlueter at 4techwork.com> wrote:
> Ok guys, I will be going  lower in the next two weeks. I need some width. I 
was thinking 15mm spacers all  around. I have 16x7.5 et35 bbs moda's. so what 
do you think? 17mm would be  perfect for dtm look, but 15mm(9/16") would be 
real good too. Any  suggestions?
>
>
>
> Andrew W. Schlueter
> '90 V8  MQuattro MSnS-E
> '90 Jetta VR6TT Quattro
> HYPERLINK  "http://www.hausofdub.com"www.hausofdub.com
 



************************************** See what's free at http://www.aol.com.