[V8] Front Strut Swap

[Ron Wainwright]

The 100 Scott wants to use parts from I think has the
correct 19mm ball joints, but the controll arms have a
slight twist to them. So you'll have to use yiour V8
controll arms.
 But the 92 was the new C4 bodie style.

 Not sure about hub offsets though. My wifes 96 A6qa
has 45mm offset hubs..so you may have to swap hubs to
get them back to 35mm..or use 10mm spacers.

 Ron

--- Scott Phillips <Scottp at ippe.com> wrote:

> Scott.. 
> 
> You mean your V8 has UFO's and you have a line to
> get G60's correct?
> 
> The 100 Q used smaller balljoints than the V8/S4/S6,
> But you can do it.
> 
> 
> Other than swapping the struts and uprights, you'll
> also need the brake
> hoses from the frame to the calipers also you'll
> need the lower control
> arms as well.. 
> 
> The ABS sensors, upper bearing plates and strut
> mounts should all bolt
> in. You might have to swap springs as the 100 wasn't
> as heavy as the V8
> and the ride height will be a bit off.
> 
> HTH.
> 
> Scott
> 
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans
> Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding
> to the KB ... all contributions welcome!
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com