[V8] Rear Sway Bars

[Sean cole]

I want stiffer front as well.  I know It's not needed for a daily driver,
but neither is a set of wild cams P&P'd heads, high compression, 6-speed
convo, and daul 2.5" engine back exhaust.

I think I might have figured out a way to do what I want that might make it
reasonable for most on here.  I won't exactly spill the beans till I know it
can be done.  I would like something like 30mm front with 28mm rear with the
option of adjustment.  I also don't want



On 8/5/07, Ron Wainwright <ron_01056 at yahoo.com> wrote:
>
> I got 800lb rears & 750lb fronts as far as spring
> rates go. I'll abuse the single adjustable Koni's for
> a year & then opt for the dual adjustable units.
>
> & saying you have a RSB on a car that didn't come
> with one just sounds k00l...that's
> why I'm doing it ;-)
> But seriously I'm adding one to tighten up the rear
> end. With the 5spd V8 at least the rear end has a
> tendancy to step out a bit. I just want to control it
> a bit.
> There are 2 options as far as RSB'S go..17mm OE bar,
> or 28mm adjustable Hapersized bar. The 28mm bar is
> made by a Urs4/6 car enthusiast.
>
> Ron
>
> --- "Carol, Dave, and Zach Weiss"
> <cdzweiss at charter.net> wrote:
>
> > Hey, guys, gotta ask-- will the new springs
> > (assuming much bigger increase
> > in rear rates than fronts) and bigger front bar
> > change the balance that much
> > that you have to add a rear bar?  What are the new
> > spring rates going to be?
> >
> >
> >
> > Dave
> >
> > (way behind on my 4.2 and interior swap)
> >
> >
> >
> > Sean Cole wrote:
> >
> > >>
> >
> > So I know there are part junkies on here.  So any
> > one have the larger
> >
> > 4.2Lfront sway bar they are willing to part with?
> > I'm looking to find
> >
> > one to
> >
> > install on my 3.6L car with some Koni's and vogtland
> > springs to complete the
> >
> > front with the 92 S4 rear sway bar set-up and
> > koni/vogtland setup in the
> >
> > rear.
> >
> > <<
> >
> >
> >
> > Ron Wainwright wrote:
> >
> > >>
> >
> > All so finished gathering all the suspension parts
> > for my swap. 95.5 S6A rear sway bar setup, camber
> > links, 2Benn rear coilovers, front "A" arm bushings,
> > wheel bearings, ect, ect, ect...front's the
> > same....28mm front 4.2 swaybar, 2Benn front
> > coilovers,
> > 2Benn Revolution camber/caster plates, Porsche Big
> >
> > Reds, subframe bushings, ect, ect, ect....
> >
> > <<
> >
> > _______________________________________________
> > Audifans V8 mailing list
> > Send posts to: mailto:V8 at audifans.com
> > Manage your list connection:
> > http://www.audifans.com/mailman/listinfo/v8
> > Have an Audi V8 question?  Check the Audifans
> > Knowledgebase!
> > http://www.audifans.com/twiki/bin/view/Audi/V8
> > Have a V8 answer? ... Please help others by adding
> > to the KB ... all contributions welcome!
> >
>
>
>
>
>       ____________________________________________________________________________________
> Shape Yahoo! in your own image.  Join our Network Research Panel today!
> http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7
>
>
>