[V8] Distributor Rotor Installation

Ingo Rautenberg ingo.rautenberg at gmail.com
Thu Aug 23 21:34:07 EDT 2007


Yup. Bob's right.  No glue necessary.

Ingo


On Aug 23, 2007, at 2:48 PM, Korn, Bob wrote:

> Glue is not necessary with the push on type rotors. This was a factory
> assembly method as they looked at the distributors as a component  
> to be
> replaced as a complete assembly.
> Bob
>
>
> -----Original Message-----
> From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On  
> Behalf
> Of Scott Simmons
> Sent: Thursday, August 23, 2007 1:32 PM
> To: V8 Audi Fans
> Subject: [V8] Distributor Rotor Installation
>
> Should I apply glue when installing a new dizzy rotor?  If so, what
> type?
>
> This is, obviously, for the glue-on rotor, not the set-screw style.
>
> ~Scott S.
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/ 
> listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/ 
> listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ...  
> all contributions welcome!



More information about the V8 mailing list