[V8] Hood latch problem
Scott Simmons
indischrot at gmail.com
Sat Dec 8 21:12:17 PST 2007
I jacked up the car then crawled under it. Using a long reach and a
stubby phillips, I removed the side marker light (next to headlight) on
each side. This allowed me to reach in directly and push on the
latching levers (what the cable pulls on).
~Scott S.
John Bysinger wrote:
>http://www.quattro123.com/AudiHoodOpenClinic.htm
>
>Above is a good write-up with pics, below is from an email I sent a long
>while back describing how I did it:
>
>using a wire coathanger and some wire cutters/pliers clip the hanger like a
>sideways L using the long straight portion of the hanger so it looks like
>this:
>
>|___________
>
>then using the pliers, bend the right end up so a 1/8" long 'hook' is made,
>I bent mine past 90 degrees to counter it un-bending when I pull on it.
>which leaves something like this:
>
>|___________,
>
>using the left end as a handle, you'll insert the hook end into a hole in
>the grill aiming for the top corners of the radiator. try to keep the wire
>as close to parallel with the bumper as you can to prevent slipping, as
>you're trying to pull sideways not forward.
>
>Now here a flashlight helps, you want to look about 4" directly behind the
>top corner of the headlight, you'll see the latch spring rod. It will be
>running front to rear, and you may be able to see the hood pin behind it.
>This rod is the spring that the hood cable pulls on. You'll want to try to
>slide your new hook tool under it with it turned sideways, once the hook is
>behind it, turn 90 degrees so the hook is behind the rod, and gently pull on
>it (it will take some force, but pulling too hard will straighten out your
>hook-tool.) Use your free hand to lift on the hood once the lock pin is
>loose. I shoved a rolled up rag under it to keep it from re-latching, then
>repeated the other side.
>
>It may take a couple tries, but I was able to get my first latch in about 3
>minutes, the second, less than a minute.
>
>-John
>'90V8Q
>
>
>
>
>On 12/8/07, Dave Brune <bruned at cox.net> wrote:
>
>
>>How do you get the hood open on a 90 V8 Quattro that the latch wire has
>>broken/come loose on?
>>Any help is appreciated as I now have two cars with the same problem.
>>
>>Dave in Las Vegas
>>_______________________________________________
>>Audifans V8 mailing list
>>Send posts to: mailto:V8 at audifans.com
>>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>>
>>You can help keep the audifans site running by shopping at
>>http://audifans.com/shop/
>>
>>
>>
>>
>
>
>
>
More information about the V8
mailing list