[V8] FW: v8 about to go to machine shop

[dsaad at icehouse.net]

missing flywheel teeth?

that might mean the local high school gets a V8 to play with...

Quoting Scott Phillips <Scottp at ippe.com>:

> Steve.. any codes?
>
> Surging... off the top of my head.. MAF, IAC , MAP , FPR , Vac Leak in
> that order
>
> Accelerator.. cable hung up. Remove the air filter box (2x13mm) and your
> right there. Easy to check, also might be the throttle return spring.
>
> Car is in first.. you sure., it's not D (limp mode).. on the IC is only
> D lit? (again codes)..
>
> HTH..
>
> Scott '90 V8Q x2
>
> -----Original Message-----
> From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf
> Of Steve Kramer
> Sent: Tuesday, January 16, 2007 4:37 PM
> To: v8 at audifans.com
> Subject: [V8] v8 about to go to machine shop
>
> V8ers,
>
> I have a patient 1990 white v8 that I need to fix, sell or donate to the
>
> local high school.
>
> Car has 3 big problems.
>
> - car idle goes up and down while in park -
> - accelerator doesn't work - when I rev the engine it barely goes up
> - car stays in first.
>
> 2 lesser problems
>
> - leaking steering pump
> - rear control arm bushings worn
>
> If, I could get the first 3 done I might save the car.  Otherwise it
> might
> be a good parts car for someone.
>
>
> Steve Kramer
>
>
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>