[V8] Cheap upgraded motor mounts for our cars

[Ron Wainwright]

These mounts will work just fine. I had Javad mail me
the damentions...threaded rod length, ect...& I
measured the ones I have they are perfect!
 Not too mention our V8 motors weigh a bit less than
an I-5...but you being a HUGE contributor & a LONG
time lister would know that....

 So I'm opting for the Track Density mounts & will
report back.
 But I suppose if I post a pic of my twin turbo
manifolds on my 3.6 motor you'll say those aren't
interchangable cause of the opening that the turbo's
bolt too!

 Ron

--- cobram at juno.com wrote:

> Those are I5 mounts, you can get OEM Sachs-Boge for
> about $50.  Some I5's
> aren't interchangeable, they sit too high/low if you
> mix applications,
> you're going to have the same problem on some cars
> with one size fits
> all.
>  
> BCNU,
> http://www.geocities.com/cobramsri/
> Disney World - a people trap operated by a mouse.
>  
> 
> Ron Wainwright <ron_01056 at yahoo.com> writes:
> > As Subject header states...smoking deal!!!
> > I'll prolly be ording up some Track Density
> > ones...anyone else think they wanna get a set of
> > eather the Street Density or Track Density? Maybe
> a GB
> > can be had. But for $68 each....thats quiet a bit
> of
> > saved $$$ over the OE $130'ish dollar mounts.
> > 
> >
>
http://www.034motorsport.com/product_info.php?manufacturers_id=&products_
> id=983
> > 
> >  Ron
> 



       
____________________________________________________________________________________
Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.
http://get.games.yahoo.com/proddesc?gamekey=monopolyherenow