[V8] Cheap upgraded motor mounts for our cars

[cobram at juno.com]

Yup, that's ALL that counts when it comes to automotive mounts, the
"damentions."  Hmm, the dampening of solid rubber mounts an "upgrade" vs
hydraulic mounts, just leave collapsed OEM mounts in and save the money. 
Or better yet, if they're the same, just put in OEM I-5 mounts, now
there's a smokin deal, $50 each. I put some 200T mounts I had in a 5KS,
perfect fit...if only the engine wasn't hitting the hood.  Track density:
"marked increase in vibration from the drive train", two words:  Hockey
Pucks, cheap and versatile.
If you're going to track the car, or want to test those molar fillings,
go for it.  
For those who prefer the V8Q for it's refinements, solid rubber mounts
might not be an "upgrade" they'd want.
As for what manifolds, hood scoops or dingo balls fit your car, an old
Gaelic word says it best: Dilligaf.

BCNU,
http://www.geocities.com/cobramsri/
Disney World - a people trap operated by a mouse.
  
Ron Wainwright <ron_01056 at yahoo.com> writes:
> These mounts will work just fine. I had Javad mail me
> the damentions...threaded rod length, ect...& I
> measured the ones I have they are perfect!
>  Not too mention our V8 motors weigh a bit less than
> an I-5...but you being a HUGE contributor & a LONG
> time lister would know that....
> 
>  So I'm opting for the Track Density mounts & will
> report back.
>  But I suppose if I post a pic of my twin turbo
> manifolds on my 3.6 motor you'll say those aren't
> interchangable cause of the opening that the turbo's
> bolt too!
> 
>  Ron
> 
> --- cobram at juno.com wrote:
> 
> > Those are I5 mounts, you can get OEM Sachs-Boge for
> > about $50.  Some I5's
> > aren't interchangeable, they sit too high/low if you
> > mix applications,
> > you're going to have the same problem on some cars
> > with one size fits
> > all.
> >  

> > 
> > Ron Wainwright <ron_01056 at yahoo.com> writes:
> > > As Subject header states...smoking deal!!!
> > > I'll prolly be ording up some Track Density
> > > ones...anyone else think they wanna get a set of
> > > eather the Street Density or Track Density? Maybe
> > a GB
> > > can be had. But for $68 each....thats quiet a bit
> > of
> > > saved $$$ over the OE $130'ish dollar mounts.
> > > 
> > >
> >
>
http://www.034motorsport.com/product_info.php?manufacturers_id=&products_
> > id=983
> > > 
> > >  Ron