[V8] Timing Belt Progress

[Gunter Lorberg]

It's the big nut on the back side.  It's a reverse thread.  Make sure that you use a proper fitting wrench as it may be on tight.  I purchased a set of vicegrip-like rubber strap tools (found some inexpensive plastic ones at Wal-mart, I believe).  I used the best-fitting one to wrap around the viscous fan pulley for counter leverage (the serpentine belt was removed, of course).

Gunter
(2) 1990 V8's...Canadian spec


----- Original Message ----
From: Lanier Pratt <lanierpratt at mac.com>
To: V8 Audi Fans <V8 at audifans.com>
Sent: Monday, May 14, 2007 11:12:31 PM
Subject: [V8] Timing Belt Progress


Ok guys.  I've gotten the front end off and now I'm stuck.  How do  
you get that darn cooling fan off?  Is it the big nut on the back  
side of the fan or is it the three small 10mm bolts on the fan  
itself?  I've posted some pictures for a visual progress report.

Lanier Pratt
'92 V8Q 4.2L
'90 V8Q 3.6L

http://web.mac.com/lanierpratt/iWeb/Site%207/Timing%20Belt.html
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question?  Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!