[V8] Handfull 'o questions...
Scott Simmons
indischrot at gmail.com
Tue Nov 6 18:58:11 PST 2007
For the trans fluid, I did four quarts of M1 plus a bottle of red
LubeGard (put it in first). What Scott says makes sense and I do the
good ol' "shoulda had a V8" donk onto the forehead. But I did change it
3 times and plan on a fourth sometime to do the filter.
What all is involved when changing the filter?
I've seen remann'ed ZF4HP22's lately for about $2500. I can get you
one. I know a guy who knows a guy. Fell off a truck.
~Scott S.
toml99 at todomundo.com wrote:
>Hi all, well I just changed the caps/rotors/wires/oxygen sensor/
>distributor and flange gaskets for their first time ever (98K) and it
>feels like someone slipped a turbo in there....always thought it ran/
>idled great except for a slight surging(which is gone), and even
>though it had it's difficulties, thoroughly enjoyed working on it. I
>plan on changing the tranny fluid and possibly some suspension parts
>which is where I have a few questions....
>(a) Do the exhaust/cat donuts need to be replaced when removed/is
>dealer only option as I haven't found them elsewhere?
>
>(b) Noticed my front inner control arm bushings are torn(everything
>else feels tight/looks fine). If I just replaced inner and outer and
>sway bar bushings, will I need an alignment.
>
>(c)My tranny was replaced under warranty @ 48K(factory remanufactured
>unit which was listed on receipt as $4608) and the fluid hasn't been
>changed. Receipt lists the fluid as ZVW366353(dead part number) for
>(get this) the whopping low price of $1.70/qt.(1997) Currently
>doesn't leak a drop. Planned to remove the cooler lines and replace
>filter. Been advised by a few as to use Mobil 1. Anyone have any
>info/opinions on fluid?
>
>(d)I also was going to replace the steering damper as when I took it
>out, it felt "bad"....but I was dying to drive the car and broke, so
>I sprayed some CorrosionX into the seal and pumped it a few times and
>now it feels like a smooth,weak shock. Wondering if anyone knows if
>it's just a simple piston and seal, or if it's gas filled....
>
>I hope all are well and any info would be greatly
>appreciated....Sincerely Tom Laplante
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question? Check the Audifans Knowledgebase!
>http://www.audifans.com/twiki/bin/view/Audi/V8
>Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
>
>You can help keep the audifans site running by shopping at http://audifans.com/shop/
>
>
>
>
More information about the V8
mailing list