[V8] ABS Light On

[Scott Phillips]

1990 V8 Q

 

Two weeks ago I did a suspension refresh (front) and as a result crushed pass ft ABS Sensor with the ABS ring (noticeable missing  piece in ABS Ring) Replaced the drive axel over the weekend and got a used ABS sensor (tested good). I replaced the sensor tonight and all looks good, drive car and ABS light resets itself with the ign off. Drive for 1/4mile and the light kicks back on. It is not speed dependant, I can bring the car up to 65mph before the light will trip. It is distance it's always about the ¼ mile. 

 

I left the manuals at work, so I'll read up on it more tomorrow, but wanted to ask in general where I'd start to track this down.. 

 

As a result in sharp turns the cars acting like a old 4x4 and binding up the opposite wheels during the slow speed turn (like to turn around in a street sharp).. thoughts??

 

Thanks in advance! 

 

Scott

 

Scott Phillips - Director Information Technology and Information Services
International Process Plants 
17A Marlen Drive · Hamilton, NJ 08691 · USA
Tel: (609) 586-8004 · Fax: (609) 586-0002 · 
email: scottp at ippe.com <mailto:scottp at ippe.com>       Website:  www.ippe.com <http://www.ippe.com/>  

Global Suppliers of Quality Used Process Plants and Equipment
Let us know what plants and equipment you have for sale

_________________________________________________________________________________________________________________________________________________________________________

This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or the person responsible for delivering to the intended recipient, please be advised that it has been sent in error and therefore any use is strictly prohibited. If you are not the intended recipient, or if you are concerned about the content of this e-mail, please notify us at (609) 586-8004