[V8] ECU CONNECTION

[Kneale Brownson]

When I contacted ShadeTree about the ProDiag not communicating, they suggested there may be a problem with the wiring between the connectors and the ECU.  I could get ProDiag to communicate with the ECU on my 200q20v, but not on V8 #1.  

AWHdcny at aol.com wrote:  I have a '93 V8 Q with 165,000 miles. Car is in excellent condition 
mechanically and cosmetically. I am unable to pull codes from ECU. Using Pro Diag 
and the message from the application says the 'ECU is not responding or is 
not present'. The application will pull the codes for the HVAC, Transmission, 
Airbag. Any thoughts or solutions?

Allan H.
'93 V8Q
'91 Suzuki Samurai
'90 VW Corrado
'73 MB 450 SEL






************************************** See what's new at http://www.aol.com
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question? Check the Audifans Knowledgebase!
http://www.audifans.com/twiki/bin/view/Audi/V8
Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!

You can help keep the audifans site running by shopping at http://audifans.com/shop/