[V8] 1991 V8 Transmission problems

[Scott Simmons]

Mike,

    The car CAN be read with VAG-COM, but I'm not sure if it would read 
any of the transmission codes.  It may do so, but I haven't ever tried.

SJM's website, 
http://www.sjmautotechnik.com/trouble_shooting/ecufv8.html , details how 
to blink out transmission codes.

~Scott S.

mike dodge wrote:

>Im trying to help a friend in transmission shop with a 1991 audi V8
>Quattro Automatic:
>
>Vin WAUZZZ4CZMN003331
>Chassis C42 G16
>Engine code PT 3200cc V8
>Trans AFV 4 stage quattro ZF transmission
>Trans ECU bosch 0260 002 195, Audi 441 927 156M, ZF 0501 004 148
>
>I tried to scan with X431 using the Audi 4 (2+2) connector with no
>luck. All I get is a locked data line. Car has a bank of four
>connectors under the floor board of the passengers footwell (right hand drive) and identified as:
>1 power
>2 Transmission
>3 Engine
>4 Instriment cluster
>
>The car will drive in limp mode(all the shift positions are lit up on
>the cluster.)Trans has been overhauled and found to be in excellent
>condition.
>
>Is this chassis likely to be the older "slow" data transfer system?
>Can it be read with Vag com?
>Is it possible to get flash codes?
>Does anyone have any data about diagnosing this car??
>
>Its now been several months not going and the trans shop has given up and the owner has also.
>Any Help much appretiated!
>
>dodgemnz
>New Zealand
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
>You can help keep the audifans site running by shopping at http://audifans.com/shop/
>
>
>  
>