[V8] heater core?

[Michele_Deltergo at KeyBank.com]

No skinny arms needed.  A 12-14 inch needle nose pliers comes in handy 
though.  Bought one of those cheepy 3 plier sets with hunter orange 
handles for $12 or so.  (regular tip, right angle tip and 45% tip.) Simply 
re curl the lost link, attach side of your choice and use pliers 
judiciously to stretch and reattach other end to anchor of choice.  Stock 
spring is pretty heavy duty for its size!

[V8] Subject: heater core?
kneale at coslink.net kneale at coslink.net 
Wed Nov 12 11:04:54 PST 2008 
Previous message: [V8] Subject: heater core? 
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] 

There are those, obviously with skinnier arms and greater dexterity than 
I,
who make the spring repairs with glove box in place, but not this guy. 



Email Classification: KeyCorp Internal



*******************************************************************************
This communication may contain privileged and/or confidential information. It
is intended solely for the use of the addressee. If you are not the intended
recipient, you are strictly prohibited from disclosing, copying, distributing
or using any of this information. If you received this communication in error,
please contact the sender immediately and destroy the material in its entirety,
whether electronic or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the 
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose
such information for any purpose other than to provide the services for which
you are receiving the information.

127 Public Square, Cleveland, OH 44114
*******************************************************************************


If you prefer not to receive future e-mail offers for products or services from Key 
send an e-mail to mailto:DNERequests at key.com with 'No Promotional E-mails' in the 
SUBJECT line.