[V8] Rim question

[Ed Kellock]

The wheel in question is not an OEM wheel.  It is a Ronal R38.  

I would not mind the 7.5 inch width at all as it allows better choice of
tire fitment and retains the stock width.  The offset would be better at
et35 which would maitain the exact tire/wheel presentation/position in the
wheel well.  ET40 is really not that far off though.  The bottom line would
be fitment over the UFO.  From what I can see in pix I found on the web, I
would feel pretty confident that is would be ok as the spokes are fairly
well flush to the face of the wheel/outer rim.

Ronal is a good brand.  The only question I would have would be weight.  

Ed


> -----Original Message-----
> From: Roger Woodbury [mailto:rmwoodbury at roadrunner.com] 
> Sent: Monday, October 13, 2008 9:52 AM
> To: 'Ed Kellock'
> Cc: v8 at audifans.com
> Subject: RE: [V8] Rim question
> 
> 
> Ed:  Here's a picture of one of the wheels.  I suspect that 
> these won't work as I received another email from the seller 
> this morning wit h these additional numbers:
> 
> 	38R6755.08
> 	7.50jX16H2
> 	S: 11
> 	ET 40
> 
> I suspect that the top set of numbers might be the part 
> number, the second set is the wheel width and diameter.  The 
> "S:11" means nothing to me but the bottom numbers, ET 40 are 
> the offset, I'll bet.
> 
> I think these wheels are either A4 or perhaps A6, and the 
> offset is wrong for the V8.
> 
> Now, I am wondering if the offset might work for my wife's 
> 100CS wagon although I don't need either tire or wheels for that car.
> 
> Roger
> 
> -----Original Message-----
> From: Ed Kellock [mailto:ekellock at gmail.com] 
> Sent: Monday, October 13, 2008 11:29 AM
> To: rmwoodbury at roadrunner.com
> Subject: RE: [V8] Rim question
> 
> Roger,
> 
> Can you send me a pic of these wheels?  The sequence of 
> numbers you provide is not typically indicative of the offset 
> in my experience.  Or, do you know what original model of 
> Audi they were on?
> 
> Ed
> 
> > -----Original Message-----
> > From: v8-bounces at audifans.com
> > [mailto:v8-bounces at audifans.com] On Behalf Of Roger Woodbury
> > Sent: Saturday, October 11, 2008 9:58 AM
> > To: v8 at audifans.com
> > Subject: [V8] Rim question
> > 
> > 
> > I have a chance to buy some interesting OEM rims and wonder
> > if they will radically fight with my V8.  I have asked the 
> > seller to give me the offset and size and here is the 
> > information that I have received.  These are 16" wheels.  
> > According to the seller the numbers on the inside of the rims are:
> > 
> > 	38R675 5.08
> >       7.50Jx16H2.
> > 
> > It would be extremely useful if someone out there has current
> > Audi wheel part numbers. I read these numbers are meaning 
> > that the rims are 7.50 inches wide and perhaps the offset is 38?  
> > 
> > Comments?
> > 
> > Roger
> > 
> > _______________________________________________
> > Audifans V8 mailing list
> > Send posts to: mailto:V8 at audifans.com
> > Manage your list connection:
> > http://www.audifans.com/mailman/listinfo/v8
> > 
> > You can help keep the audifans site running by shopping at
> > http://audifans.com/shop/
> > 
> > 
> > No virus found in this incoming message.
> > Checked by AVG - http://www.avg.com
> > Version: 8.0.173 / Virus Database: 270.8.0/1722 - Release 
> > Date: 10/13/2008 7:50 AM
> > 
> 
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.173 / Virus Database: 270.8.0/1722 - Release 
> Date: 10/13/2008 7:50 AM
>