[V8] Bearing puller

[Jason Wilkerson]

The HF puller is great - done three of mine that way so far.  Don't put it on backwards though!  I did and i just kept pushing the bearing in until the nut welded to the allthread stripped.  No big deal, I just had to get a new Grade 8 nut as the threads on the allthread were still good.  I also bought a big slide hammer from HF to pull the hub first - works well also, but is starting to crack after the three I have done, plus it doesn't fit exactly right, but you can make it work.  Also, make sure to leave everything attached while you are pulling the hub, it is almost impossible to pull out unless everything is rigid.  Then I just take a air chisel to get the inner race off of the hub.  Works like a charm.  Good luck.  Jason