[V8] Need V8 Blower Motor Fix

[cobram at juno.com]

Never go used on a blower motor.  It's too much of a PITA to replace, and
chances are the used one might be on it's last legs too.  There was a
lister (I think on the main list) who replaced the brushes, but, alas,
not in the car.  You still have to remove the motor and solder them in.
 
BCNU,
http://www.geocities.com/cobramsri/
"God's a kid with an ant farm. He's not planning anything."
 
"Brad Hartman" <info at speakoutpro.com> writes:
> I have a 1990 V8 that has a failing blower motor (for heater, etc.)  
> The 
> brushes need replacing.  Is there an easy way to drop a new brush 
> into the 
> hole that's normally covered by the rubber hose?  If so, where can 
> one buy 
> the brushes?  (I have, over the years, pushed down the retaining 
> spring that 
> applies a downward force to the brushes and have kept this sucker 
> alive (as 
> well as the occasional spray of WD-40)).
> 
> If this is not an option, any leads on a good used blower motor?
> 
> Thanks,
> 
> Brad Hartman