[V8] Distributor rotor replacing

[dsaad at icehouse.net]

I think it is the driver side distributor flange - the part that mates
into the cam shaft.  The drive "tooth" has a fiber cover
type thing over it and it breaks off.  Mine has a piece
missing.  It still seems to run OK but the rotor is probably retarded
just a tad.

Dave

> Dave, not sure I'm visualizing
the part your describing below?
> 
>  Ron
> 
> 
> --- On Sun, 1/25/09, Dave Saad
<dsaad at icehouse.net> wrote:
> 
>> Also, be very
careful with the cam drive flange. One of
>> them is made
>> of some fiber type stuff and breaks easily.
> 
>>
>>
>> On Jan 25, 2009, at 8:17 AM, Ron
Wainwright wrote:
>>
>> > I absolutley agree with
Ed! It takes 5 minutes to
>> remove the dizzy's.
>>
> I use a 1/4" 8mm socket/ratchet setup with a
>> small
extension to
>> > remove the cap bolts. &
>>
> a 10mm 1/4" setup to remove the dizzy's.
>> >
>> >
>>
_______________________________________________
>> Audifans V8
mailing list
>> Send posts to: mailto:V8 at audifans.com
>> Manage your list connection:
>>
http://www.audifans.com/mailman/listinfo/v8
>>
>>
You can help keep the audifans site running by shopping at
>>
http://audifans.com/shop/
> 
> 
> 
>