[V8] starter relay (was back-up light switch)

[Kent McLean]

Tony wrote:
> This part of it allows you to completely bypass the start portion of the 
> MFS. However, to make it simpler, I'd find the starter relay under the 
> dash and jump it instead. Test it to make sure it works, then that's one 
> liss thing you have to modify. I don't have the schematics for the 
> 5-speed, but I know this is in fact how Audi did it on all the other 
> manual cars of that era. No relay in that position, just a small "Z" 
> metal strip.

 From a previous posting you suggested jumping the starter relay,
terminals 38/30 and 36/87.  Here's what I got:

<http://www.audifans.com/kb/V8_starter_relay>

The terminals on the bottom of the relay are here:
<http://www.audifans.com/kb/File:V8_starter_relay1.jpg>

Is case you can't read it, the top 2 terminals are 15 and 54.
The middle 3 are , To or Ta, and P/N.
The bottom 1 is 31.

So, which terminals do I connect to bypass the relay?

Thank you for your patience.

-- 
Kent McLean
1999 A4 Avant, V6 Tiptronic
1991 200 TQA #3, with mods
1990 V8 w/5-speed and other mods
gone: '91 200 TQA x2, '94 100 S Avant, '89 200 TQ "Bad Puppy"