[V8] 28mm front sway bar and bushings

[Ben Howell]

For the record, measuring the bar is not needed. Visually look at the inner sway bar brackets: Stamped steel = 26mm & Cast Aluminum = 28mm. They are VERY different! 

Ben

-----Original Message-----
>From: Ed Kellock <ekellock at gmail.com>
>Sent: Feb 10, 2010 5:32 PM
>To: v8 at audifans.com
>Subject: Re: [V8] 28mm front sway bar and bushings
>
>I just went and measure sway bars on five cars, all 26mm. 
>
>They were 91 5spd, 92, 93, 94 V8's and a 91 Avant.
>
>Ed
>
>-----Original Message-----
>From: bw at UDel.Edu [mailto:bw at UDel.Edu] 
>Sent: Wednesday, February 10, 2010 2:00 PM
>To: Ed Kellock
>Cc: v8 at audifans.com
>Subject: Re: [V8] 28mm front sway bar and bushings
>
>
>Well, I just braved the 3 foot snows here in Delaware to measure my front
>sway bar 
>on a '93 4.2 and it measured about 2.6mm. I need to replace my sway bar 
>bushings and subframe bushings. Is there a delrin bushing option and source
>or is 
>OEM replacement parts the way to go? I am getting a clunk that I can feel is
>body 
>related.
>
>_______________________________________________
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
>You can help keep the audifans site running by shopping at http://audifans.com/shop/
>