[V8] strut bearing possibly? need a hand diagnosing

ron_01056 at yahoo.com ron_01056 at yahoo.com
Thu May 13 15:55:13 PDT 2010


All so.......... found the inner control arm bushing for under $14each for Lemforter with ia the highest quality u can buy. So if u can spend a few extra dollars i'd order the Lemforter ones which I found at www.autohausaz.com

 Ron the other v8 guru 

Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: ron_01056 at yahoo.com
Date: Thu, 13 May 2010 22:47:52 
To: Kyle Sorensen<nixon_now151 at yahoo.com>
Cc: <v8 at audifans.com>
Subject: Re: [V8] strut bearing possibly? need a hand diagnosing

I think no matter were u order the inner control arm bushing it's not going to cost u more than 10 bucks. 
The strut mount is another thing. From what i've seen there are two strut mounts. One for UFO strut housings and one for G-60 housings.
 I have only found reference to the later G-60 housings.
 Can anyone confirm two different mounts?
 From my foggy recollection the hole for the G-60 housings is wider than the UFO housings 

 Ron the other v8 guru
 
Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: Kyle Sorensen <nixon_now151 at yahoo.com>
Date: Thu, 13 May 2010 15:23:18 
To: ron_01056 at yahoo.com<ron_01056 at yahoo.com>
Cc: v8 at audifans.com<v8 at audifans.com>
Subject: Re: [V8] strut bearing possibly? need a hand diagnosing

Well the lower bushing is shot but the strut mount may have been weakend by the bigger wheel and tire combo. So the way i see it is if it's not one, there's a good chance it's the other. 

Sent from my iPhone

On May 13, 2010, at 18:20, ron_01056 at yahoo.com wrote:

So the control arm inner bushing was the problem or the strut mount...... or a combination of both or?

Ron the other V8 guru

Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: Kyle Sorensen <nixon_now151 at yahoo.com>
Date: Thu, 13 May 2010 15:15:06 
To: v8 at audifans.com<v8 at audifans.com>
Subject: Re: [V8] strut bearing possibly? need a hand diagnosing

So I'm ordering a lca inner bushing today from rockauto. Any better places or prices to get the from? Oh and a strut mount if the price is irresistible. 

Sent from my iPhone

On May 10, 2010, at 22:16, "toml99 at todomundo.com" <toml99 at todomundo.com> wrote:

Hey Kyle...top shock nut is 44 ft/lb....just so you don't crank up  
the settings too much...
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8

You can help keep the audifans site running by shopping at http://audifans.com/shop/





_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8

You can help keep the audifans site running by shopping at http://audifans.com/shop/




      


More information about the V8 mailing list