[V8] A few questions

[Ingo Rautenberg]

And it runs? I thought the manifold vacuum worked to adjust the fuel
pressure of the regulator on the fly. Why not connect it and see what
happens.

I'm a bit confused as to the vacuum hose going to the depths remark. The FPR
hose is only - what - 3 inches long and hooks up to the intake manifold
right next to the FPR, right?

Ingo

On Sep 5, 2010 10:18 AM, <ron_01056 at yahoo.com> wrote:
> Lister's, while looking over the converted 5sp I just got I noticed that
the fuel pressure regulator hose is not attached to the little nipple off
the back of the FPR.....instead
> there is a bolt in the end of the hose. But the other end of the hose is
attached to the inner depths of the Intake as it's supposed to b. My
question is,
>
> what should I do about it?
>
> Ron
>
> Sent from my Verizon Wireless BlackBerry
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at
http://audifans.com/shop/
>