[V8] 1995 Audi A6 Window Question

[ron_01056 at yahoo.com]

At the bottom center of the window glass there is a plastic bracket adhered to it. U will notice a metal rod sticking out. There is a plastic spacer, felt buffer and a metal curclip that holds the window motor assembly to the window bracket.

 And ur going to have to do as I noted cause u got ta put the glass back rite?!

Once u get the door card.....inner door panel....what ever it is u wanna call it out it'll all b self explanatory.
 My experience with the C4 door cards is that they have clips that look like an "L". The door frames has elongated slots, once ur ready to remove it u have to pull up and pull out. Once u grab it you'll b able to wiggle it around a bit so you'll b able to tell were and how it's attached.

 One more thing I should mention is, 
the four bolts that hold the door/window frame to the door shell are located.......2 on the lower corners and 2 on the top sides of the door frame. Sometimes there's some rubbery stuff covering the bolt heads....just takes a little fiddling with.
 All so...the door/window frame bolts are 13mm and the window assembly bolts are 10mm.

 Ron

Sent from my Verizon Wireless BlackBerry

-----Original Message-----
From: "Brad Hartman" <info at speakoutpro.com>
Date: Tue, 1 Feb 2011 14:37:28 
To: <ron_01056 at yahoo.com>
Cc: <v8-request at audifans.com>
Subject: Re: [V8] 1995 Audi A6 Window Question

Ron,

Many thanks for the instructions.  A few notes/questions:

1) Some thief broke the window.  It is in 10,000 pieces.

2) What is the "inner door card"?

3) What is the "Window Circlip"?

4) Does (1) above (broken window) change any of your instructions?

Thanks again,

Brad





----- Original Message ----- 
From: <ron_01056 at yahoo.com>
To: "Brad Hartman" <info at speakoutpro.com>
Cc: <v8 at audifans.com>
Sent: Tuesday, February 01, 2011 12:47 PM
Subject: Re: [V8] 1995 Audi A6 Window Question


> Just the window Glass itself or???? anyway.....
>
> .....remove the bolts (four) holding the motor/regulator too the door 
> frame.
> Remove the bolts (four) holding the window/door frame too the door shell. 
> Once that's done you'll b able to let the window/door frame fall back too 
> u so u can remove the window circlip. Once that's done u can pull the 
> window from the motor regulator.
> I think u will b able to let the window glass slide down the window frame.
>
> There might b a few steps I forgot but that's the basic jist of it. 
> Oh.....
>
> ....of course the inner door card has to b removed first.
>
> Ron
>
> Sent from my Verizon Wireless BlackBerry
>
> -----Original Message-----
> From: "Brad Hartman" <info at speakoutpro.com>
> Sender: v8-bounces at audifans.com
> Date: Mon, 31 Jan 2011 17:51:30
> To: <v8 at audifans.com>
> Subject: [V8] 1995 Audi A6 Window Question
>
> Sorry for the somewhat offtopic post, but I don't know where to take this
> question.
>
> I need to replace the driver's side window on my daughter's 1995 A6 Audi. 
> I
> have a replacement window in hand.  Does anyone have some info on the 
> steps
> to do this replacement?  Or perhaps a different site or users group I can
> approach?
>
> Thanks,
>
> Brad
>
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.449 / Virus Database: 271.1.1/3416 - Release Date: 02/01/11 
07:34:00