[V8] Stumped by spark plug cover bolts

[John Bysinger]

I think I spent the first 6 years using a long narrow Phillips between the
bar and the front firewall to get to the rear screws.  Then I caved once
and pulled the bar, and found that it was so much easier, and didn't add
much time at all.  I pull it whenever I'm working on the back half of the
engine every time now.

On Wed, Jan 16, 2013 at 9:17 PM, Dave Saad <dsaad at icehouse.net> wrote:

> I have to do this to.  It may be possible if you have a long philips
> screwdriver, but the bar comes off easy enough.
>
> Dave
>
> On Jan 16, 2013, at 10:06 PM, Ed Kellock wrote:
> >
> >
> >>> I also replaced the air cleaner. I'm still a bit puzzled as I had to
> > remove the strut support to get it back on. Really?!
> > ----  Not usually necessary... You have to hold the filter (pleats up,
> into
> > the plastic cover) up into the cover as you feed it under the support. It
> > takes some finesse to get the rubber gasket on the filter to seat
> properly
> > so you can screw it back together.
> >
> >
>
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/
>
>


-- 
john at bysinger.net