[V8] Need the passenger-side distributor for '91 3.6

[toml99 at todomundo.com]

Someone from the list rebuilt they're distributor/sourced the Hall  
sensor around the time I soldered the hall wires on Pearl in 08-09?   
I did some digging thru the archives, but can't recall who it was/ 
when.  I've got a misc. list written in the back of my manual and  
I've got HKZ101 with a ? by it for Hall sensor.  When I look that up,  
it looks like the right unit at least physically.  That off white/ 
yellowish plastic plate I'm pretty sure just holds the hall wires  
down keeping them away from the spinning window that will sever the  
wires, and the Hall is riveted to the metal plate below which is  
screwed onto distributor.  If the bearing is still good, then i'd  
guess if you took the window thingy off, you could just get rid of  
failing plastic plate, and use some epoxy/silicone to retain the  
wires.......Or you could buy a new distributor for the price of a  
parts car.....Ha.  Tom