[V8] Need the passenger-side distributor for '91 3.6

[Ronald G Wainwright]

It was Kyle from Alaska & he used Volvo parts if I remember correctly. 
I can ask Kyle if anyone really wants to know. 

 Ron 

Sent from my iPhone

> On Oct 21, 2013, at 8:05 PM, "toml99 at todomundo.com" <toml99 at todomundo.com> wrote:
> 
> Someone from the list rebuilt they're distributor/sourced the Hall sensor around the time I soldered the hall wires on Pearl in 08-09?  I did some digging thru the archives, but can't recall who it was/when.  I've got a misc. list written in the back of my manual and I've got HKZ101 with a ? by it for Hall sensor.  When I look that up, it looks like the right unit at least physically.  That off white/yellowish plastic plate I'm pretty sure just holds the hall wires down keeping them away from the spinning window that will sever the wires, and the Hall is riveted to the metal plate below which is screwed onto distributor.  If the bearing is still good, then i'd guess if you took the window thingy off, you could just get rid of failing plastic plate, and use some epoxy/silicone to retain the wires.......Or you could buy a new distributor for the price of a parts car.....Ha.  Tom
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> 
> You can help keep the audifans site running by shopping at http://audifans.com/shop/
>