[V8] Anyone taken apart the trunk lock mechanism?

[Dave Saad]

You might try hosing it down with wd-40. That might push out the gunk.

Sent from my iPhone

> On Feb 23, 2016, at 8:14 PM, Luis CaifanSC <caifansc at gmail.com> wrote:
> 
> Hi everyone,
> 
> I'm having issues with my trunk lock cylinder. The key would not go in all
> the way (not even half way) so I removed the lock cylinder from the trunk
> lid so I could fiddle with it. I was able to wiggle the key in further and
> I can tell its just old gunky grease inside the cylinder. My intention was
> to open it up and clean it from any other debris...but after removing the
> backing plate in the cylinder I can't seem to separate the cylinder from
> housing. Was wondering if any of you gents have any experience taking this
> apart?
> 
> Thanks!
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> 
> You can help keep the audifans site running by shopping at http://audifans.com/shop/
>