[V8] What size caliper rebuild kits do I need (G60)?

[Scott Phillips]

The G60's are a 54mm bore.  I used Doorman D351449 when I did them last. 

-HTH
ScottP

-----Original Message-----
From: V8 [mailto:v8-bounces at audifans.com] On Behalf Of Bryan Kamerer
Sent: Tuesday, October 03, 2017 6:45 PM
To: v8audi <v8 at audifans.com>
Subject: [V8] What size caliper rebuild kits do I need (G60)?

Hi all,

I've been off the list a while as I had some distracting life events over the last two years - house fire, parental illness, etc.  Things are back to battery now.

My V8 has sat a while and this winter, I'm going all through my V8 5-speed and rebuilding most systems, removing lots of parts for refurbishing/refinishing, etc. Goal is to have it all done by next summer.
The driveline is fine, but I need to attend to all hydraulics, one axle, headliner, some body issues (more on that later).

First - what size caliper rebuilds kits do I need? When I look at part catalogs, I see both 54mm and 60mm kits for the Girling brakes.  I was the 2nd owner on this and it already had the G60 conversion on it, so I don't know where it came from.  The car was in NY and VT from 1991 to 2002. It's really pretty clean underneath except the suspension and brakes, so I'm taking them all off to strip/refinish/or replace components as a first step.

Thanks.  There will be lots of questions over the winter.

Bryan
Snoqualmie, WA
_______________________________________________
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8

You can help keep the audifans site running by shopping at http://audifans.com/shop/