[V8] What size caliper rebuild kits do I need (G60)?

[Bob]

Since the G60 front setup is not considered adequate to stop the car you may want to look at what upgrades may be available now. 

I've looked at changes for the UFO's but not the G60. Your strut assemblies are different. 




Bob 
----- Original Message -----

From: "Bryan Kamerer" <kamerer at gmail.com> 
To: "v8audi" <v8 at audifans.com> 
Sent: Tuesday, October 3, 2017 5:45:09 PM 
Subject: [V8] What size caliper rebuild kits do I need (G60)? 

Hi all, 

I've been off the list a while as I had some distracting life events over 
the last two years - house fire, parental illness, etc. Things are back to 
battery now. 

My V8 has sat a while and this winter, I'm going all through my V8 5-speed 
and rebuilding most systems, removing lots of parts for 
refurbishing/refinishing, etc. Goal is to have it all done by next summer. 
The driveline is fine, but I need to attend to all hydraulics, one axle, 
headliner, some body issues (more on that later). 

First - what size caliper rebuilds kits do I need? When I look at part 
catalogs, I see both 54mm and 60mm kits for the Girling brakes. I was the 
2nd owner on this and it already had the G60 conversion on it, so I don't 
know where it came from. The car was in NY and VT from 1991 to 2002. It's 
really pretty clean underneath except the suspension and brakes, so I'm 
taking them all off to strip/refinish/or replace components as a first step. 

Thanks. There will be lots of questions over the winter. 

Bryan 
Snoqualmie, WA 
_______________________________________________ 
Audifans V8 mailing list 
Send posts to: mailto:V8 at audifans.com 
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8 

You can help keep the audifans site running by shopping at http://audifans.com/shop/