[Vwdiesel] broken headbolt conclusion

[LBaird119 at aol.com]

> When I squirted oil in the hole I noticed it didn't fill up with oil as
> somehow there was a crack or hole that when into the coolant passage area

  JB Weld?  If it's just an opening into the coolant area that might work.
If
it's an actual crack, visible to the deck then the block was bad to start
with,
thanks to a PO.  :(
  Perhaps the opening to the coolant is why the bolt's rusted in place to
start with.  Sealing it off would remedy that.  You'd be amazed at what's
been done!  Of course if you have a perfectly good block sitting around,
why not use it right?  :)
     Loren