[Vwdiesel] Broken Bleeder Valves

[LBaird119 at aol.com]

>    For bigger bolts like that, if you can drill a hole, you're best off
using
> a cutting torch, heating up the bolt red hot, and giving it the oxy. Just
> burns out the bolt very nicely if your're careful and never touches the
threads.

  That's the same way I cut out the pressed in, right side/front motor
mount!  Works great and at worst you touch it with a file to clean up
any slag that stuck.  Of course you have to do it quick due to all the
smoke from the burning rubber!
     Loren