[Vwdiesel] Rabbit "High Caliper advice".

[H .Hagar]

This is a multi-part message in MIME format.
--
[ Picked text/plain from multipart/alternative ]
This is for newbie buyers of Rabbits 1980 to 1984 -- Do NOT do like Hagar -=
 he broke 3 bleederscrews before doing it RIGHT.
Do not try to move the screws until you follow directions by  LOREN and the=
  fella with the detailed instructions . forgot his name but ask me and I s=
hall find it. Say starting with left front--turn wheel full left--use 14 mm=
 open end wrench --break line fitting loose.--retighten loosely.----Jack up=
 remove wheel ---Remove the two guidepins.---Pull caliper --leave pads. --N=
ow you can turn calipers to remove from Rabbit.---Piece of cake.

With caliper in hand follow  "Val Christian" procedure ---it works. Did one=
 more yesterday.

Then when finished --remember to do a " exercise   "LOREN" ---move screws a=
t least every year. I am going to do it every oilchange.       To stop dirt=
 and fluid etc. Use an old line. Hacksaw at fitting and use a sheetmetal sc=
rew to terminate. .Those ends are handy for cheapskates like me ---little l=
oss of fluid from Rabbit while doing Caliper.    wish you luck.       Hagar.
Ps: Thanks Val and Loren.
--