[Vwdiesel] rings

[Nate Wall]

The A-2 Jetta Bently torque angle procedure was
definitely listed for the diesel/TD and I've done it
twice and it works.

--Nate

--- Drew MacPherson <drew at scirocco.cs.uoguelph.ca>
wrote:
>
> Any diesel connecting rod that has a shouldered nut
> should have a
> torque-angle bolt, unless someone replaced a regular
> nut with a shouldered
> one.  This includes all TD engines, and certainly
> 1.6D since 82 or so I
> expect.
>
> On the gas side I believe that all 1.8 (and 2.0)
> engines use torque angle
> bolts, while 1.6 and 1.7 do not.
>
> HTH,
>
> Drew
>
>
>
> On Wed, 26 Mar 2003 LBaird119 at aol.com wrote:
>
> > > The Bentley manual states a certain torque value
> for
> > >  the cap bolts plus a quarter turn. Check the
> > >  procedure. Its not just a straight torque
> value, at
> > >  least in the A-2 Jetta manual.
> > >
> >   Be careful here.  I've been told both ways that
> this is all VW's from a
> > certain year and I've been told "excluding
> diesels."  More say excluding
> > than including.
> >      Loren
> > _______________________________________________
> > vwdiesel mailing list
> > vwdiesel at vwfans.com
> > http://www.audifans.com/mailman/listinfo/vwdiesel
> >
>
> --
> /=============================================\
> |  84 Wolfsburg Edition TurboDiesel Scirocco  |
> |    http://scirocco.cs.uoguelph.ca/gtd       |
> \=============================================/
>
> _______________________________________________
> vwdiesel mailing list
> vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel


__________________________________________________
Do you Yahoo!?
Yahoo! Platinum - Watch CBS' NCAA March Madness, live on your desktop!
http://platinum.yahoo.com