[Vwdiesel] Timing belt on a 1.9NA

[jon]

I did a google search, and did find some stuff about 1.9s having a smaller
idler pulley, so the standard belt will work. We will see. I have a call
into Overland for help on this.

Jon

On Thu, 1 May 2003, Shawn Wright wrote:

> Jon,
>
> The 1.9 head is slightly taller than the 1.6, so this is most likely the reason for the
> larger belt. I don't have a 1.9 (yet), but I'm sure other 1.9 owners will have the
> definitive answer...
>
> On 1 May 2003 at 15:42, jon wrote:
>
> >
> > I've got a really wierd problem going on. I am having the shop put a 1.9NA
> > into my 1983 Vanagon. They can't seem to find the correct timing belt. The
> > 1.6 timing belt is too small. The belt that is too small is part number
> > 068 109 119 E (and they tried P as well). Does the 1.9NA have a longer
> > stroke than the 1.6NA? They are using all the stuff (Brackets, IP,
> > etc) from the 1.6NA engine.
> >
> > This is a really perplexing problem. Any help would be greatly
> > appreciated (like a part number for the belt). The shop is having a tough
> > time figuring this one out.
> >
> > Thanks!
> > --
> > Jon Kenneke, General Manager
> > Kenneke Communications - http://www.kenneke.com
> > PO Box 3126 - Albany, OR 97321-0702
> > Radio Takena KTK - http://www.radiotakena.org
> >
> > _______________________________________________
> > vwdiesel mailing list
> > vwdiesel at vwfans.com
> > http://www.audifans.com/mailman/listinfo/vwdiesel
> >
>
> Shawn Wright
> http://Zuiko.sls.bc.ca/swright
> { This message sent by Pegasus Mail, guaranteed virus-free }
> { Try the brand new version 4.1 at http://pmail.com }
>

--
Jon Kenneke, General Manager
Kenneke Communications - http://www.kenneke.com
PO Box 3126 - Albany, OR 97321-0702
Radio Takena KTK - http://www.radiotakena.org